Speeduino Base Map - VW 1.8T AEB (v0.4.4)

[engineConstants] engine_type = 0 nCylinders = 4 engine_capacity = 1781
injector_size = 315 fuel_pressure = 300 reqFuel = 7.6 injection_mode = 1
alternating = 1

[mapSensor] map_type = INTERNAL map_max = 250 baro_corr = ON

[triggerSetup] trigger_pattern = 60-2 trigger_teeth = 60 missing_teeth =
2 tooth1_angle = 84 ignition_input = VR trigger_edge = FALLING
second_trigger = CAM

[ignitionSettings] spark_mode = WASTED cranking_advance = 10
fixed_advance = 10 dwell_type = STANDARD dwell_running = 3.0
dwell_cranking = 4.0 spark_output = GOING_HIGH

[idleControl] idle_algorithm = OPEN_LOOP idle_pwm_freq = 100
idle_cranking_duty = 55 idle_warm_duty = 30 idle_valve_mode = PWM

[veTable] 38,36,34,34,35,36 45,44,43,44,46,48 52,52,54,56,58,60
60,62,66,70,72,74 70,75,80,84,86,88 78,84,90,95,98,100

[ignitionTable] 15,28,36,40,42,42 12,24,32,36,38,38 10,20,26,30,32,32
8,16,20,22,24,24 6,10,12,14,15,15 4,8,10,10,11,11

[crankingEnrichment] 220 180 140 100

Notes:

- Base startup calibration only (safe and rich).

- Verify timing with timing light at fixed 10°.

- Adjust Tooth #1 angle as required.